Yamaha RX-V671 Manual de configuração fácil - Página 7
Procurar online ou descarregar pdf Manual de configuração fácil para Recetor Yamaha RX-V671. Yamaha RX-V671 8 páginas. Setup guide
Também para Yamaha RX-V671: Manual de configuração fácil (8 páginas)
Imprimir página
3
Use the cursor keys to select
"Save/Cancel" and press ENTER.
4
Use the cursor keys to select "SAVE" and
press ENTER.
5
Disconnect the YPAO microphone from
this unit.
Now optimization of the speaker settings is
complete.
• Since the YPAO microphone is sensitive to heat, do not place
the microphone in any place where it will be subjected to direct
sunlight or high temperatures (top of an AV equipment, etc).
If "W-1: Out of Phase" appears
Follow the procedure below to check the speaker
connections.
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
1 Use the cursor keys to select "Result" and press ENTER.
2 Use the cursor keys to select "Wiring".
3 Check the cable connections (+/-) of the speaker
indicated with "Reverse".
If the speaker is connected correctly:
You can save the current settings.
Press RETURN and proceed to step 3.
If the speaker is connected incorrectly:
Turn off this unit, reconnect the speaker cable, and then
try YPAO measurement again.
7
En