Yamaha A-S2200 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha A-S2200. Yamaha A-S2200 32 páginas.

Part Names and Functions

Front panel

A (Power) switch/indicator

A (Power) switch

Power status

Up position

Standby

Down position

Off

While the A (Power) switch is in the up position,

press the A AMP key on the remote control

repeatedly to switch the power to the unit between on

and standby mode. In addition, under either of the

following conditions, the unit will enter standby

mode.

•

If the Auto Power Standby function is enabled.

(➔ page 10)

•

If you turn off the power to a device that has been set to

trigger connection to this unit. (➔ page 20)

Indicator

Lit brightly

Lit dimly

Off

NOTICE

If you plan not to use the unit for an extended period of

time, be sure to unplug the power plug from the AC

outlet. Even when the power is turned off, a minimal

amount of electric current is still flowing to the unit.

Note

• After you turn on the unit, it will take a few seconds

before the unit can reproduce sound.

• Do not turn on the power to this unit again within

10 seconds after the power has been turned off. Doing so

may generate noise.

• While the unit is in standby mode, to turn on power to

the unit first set the A (Power) switch to the down

position to turn the power off, then set the switch to the

up position.

• While the unit is in standby mode, if you unplug the

power cable from the AC outlet and then plug it in again,

the power to the unit will be turned on.