Yamaha CX-2 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha CX-2. Yamaha CX-2 19 páginas. Natural sound stereo pre-amplifier

Imprimir página

Adjusting the BALANCE control

Adjust the balance of the output volume to the left and right

speakers to compensate for sound imbalance caused from

speaker location or listening room conditions.

Adjusting the continuously variable

LOUDNESS control

This control provides compensation for the human ears' loss

of sensitivity to high and low-frequency ranges at low volume.

This control is adjustable to retain full tonal range at any

volume level.

LOUDNESS

0 dB

VOLUME

–20dB

–dB

LOUDNESS

0 dB

When you listen with headphones

When listening with headphones privately, connect the

headphones to the PHONES jack. Sounds from the speakers

are cut off.

BALANCE

For CX-2 only

Set to the "FLAT" position.

Set to the loudest listening level that

you would listen to.

Turn so that the desired volume can

be achieved.

Adjusting the BASS and TREBLE

controls

BASS

: Turn this clockwise to increase (or counter-

clockwise to decrease) the low frequency

response.

TREBLE : Turn this clockwise to increase (or counter-

clockwise to decrease) the high frequency

response.

Using the PURE DIRECT switch

You can enjoy the purest possible sound from your audio

sources by setting this switch so that the indicator above the

INPUT selector on the front panel illuminates. By doing so, the

audio signal bypasses the LOUDNESS (for CX-2 only), BASS,

TREBLE, and BALANCE controls, eliminating any alterations

to the audio signal.

Setting the SUBSONIC FILTER switch

If you set this switch to "ON" position, undesirable ultra-low-

frequency signals caused by turntable rumble or warped

records can be cut out without losing sound quality.

* This switch will function only when the INPUT selector is set

to the "PHONO" position.

BASS

TREBLE

DEFEAT

PURE

DIRECT

OFF

SUBSONIC

FILTER

OFF

PHONES