Yamaha DSP-A590 Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha DSP-A590. Yamaha DSP-A590 27 páginas. Natural sound digital sound field processing amplifier

Imprimir página

How to Connect:

Connect the SPEAKERS terminals to your speakers with wire

of the proper gauge, cut as short as possible. If the

connections are faulty, no sound will be heard from the

speakers. Make sure that the polarity of the speaker wires is

correct, that is, + and – markings are observed. If these wires

are reversed, the sound will be unnatural and will lack bass.

Do not let the bare speaker wires touch each other and do

not let them touch the metal parts of this unit as this could

damage this unit and/or speakers.

Note

Use speakers with the specified impedance shown on the rear

of this unit.

For connecting to the FRONT SPEAKERS terminals

Red: positive (+)

Black: negative (–)

General model only

Banana Plug connections are also possible. Simply insert

the Banana Plug connector into the corresponding terminal.

Unscrew the knob.

Insert the bare wire.

[Remove approx. 5mm

(1/4") insulation from

the speaker wires.]

Tighten the knob and

secure the wire.

For connecting to the REAR and CENTER SPEAKERS

terminals