Yamaha XMV4140 Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha XMV4140. Yamaha XMV4140 39 páginas. Power amplifier
Também para Yamaha XMV4140: Manual do Proprietário (38 páginas), Manual do Proprietário (42 páginas), Manual do Proprietário (43 páginas)

Imprimir página

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from

electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited

to, the following:

Power supply/Power cord

• Do not place the power cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy

objects on it, or place it in a position where anyone could walk on, trip over,

or roll anything over it.

• Only use the voltage specified as correct for the device. The required voltage

is printed on the name plate of the device.

• Use only the supplied power cord/plug.

If you intend to use the device in an area other than in the one you

purchased, the included power cord may not be compatible. Please check

with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or dust which may

have accumulated on it.

• Be sure to connect to an appropriate outlet with a protective grounding

connection. Improper grounding can result in electrical shock.

Do not open

• This device contains no user-serviceable parts. Do not open the device or

attempt to disassemble the internal parts or modify them in any way. If it

should appear to be malfunctioning, discontinue use immediately and have

it inspected by qualified Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or

damage to the device or other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

• When removing the electric plug from the device or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the device is not to be used

for extended periods of time, or during electrical storms.

Location

• Do not place the device in an unstable position where it might accidentally

fall over.

• Do not block the vents. This device has ventilation holes at the front/rear/

side to prevent the internal temperature from becoming too high. In

particular, do not place the device on its side or upside down. Inadequate

ventilation can result in overheating, possibly causing damage to the

device(s), or even fire.

• Do not use the device in a confined, poorly-ventilated location. If this device

is to be used in a small space other than an EIA-standard rack, make sure

that there is adequate space between the device and surrounding walls or

other devices: at least 10 cm at the sides, 10 cm behind and 40 cm above.

Inadequate ventilation can result in overheating, possibly causing damage to

the device(s), or even fire.

• Do not place the device in a location where it may come into contact with

corrosive gases or salt air. Doing so may result in malfunction.

• Before moving the device, remove all connected cables.

XMV4280/XMV4140

Owner's Manual

PRECAUTIONS

• Do not expose the device to rain, use it near water or in damp or wet

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may

• When one of the following problems occur, immediately turn off the power

• If this device should be dropped or damaged, immediately turn off the power

• When setting up the device, make sure that the AC outlet you are using is

• If the device is mounted in an EIA standard rack, carefully read the section

• Before connecting the device to other devices, turn off the power for all

• Use only speaker cables for connecting speakers to the speaker connectors.

• Remove the power plug from the AC outlet when cleaning the device.

1/2

PA_en_1

Water warning

conditions, or place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the device, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the device inspected by qualified

Yamaha service personnel.

Fire warning

fall over and cause a fire.

If you notice any abnormality

switch and disconnect the electric plug from the outlet. Then have the device

inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the device.

switch, disconnect the electric plug from the outlet, and have the device

inspected by qualified Yamaha service personnel.

easily accessible. If some trouble or malfunction occurs, immediately turn

off the power switch and disconnect the plug from the outlet. Even when the

power switch is turned off, electricity is still flowing to the product at the

minimum level. When you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

"Precautions for Rack Mounting" on page 7. Inadequate ventilation can

result in overheating, possibly causing damage to the device(s),

malfunction, or even fire.

Connections

devices. Before turning the power on or off for all devices, set all volume

levels to minimum.

Use of other types of cables may result in fire.

Maintenance