Calian SatService sat-nms LFTRX Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Transmissor Calian SatService sat-nms LFTRX. Calian SatService sat-nms LFTRX 13 páginas. Optical receiver/transmitter

Imprimir página

1.1.1.1 EMC compliance

This equipment has been tested and meets the specification of following EMC standards:

EN 55032

EN 55024

FCC, part 15B

ICES003 To meet all EMC requirements it is necessary to keep with the cabling requirements

mentioned in the installation chapter.

1.1.1.2 Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference; in which case, users are required to correct the interference at their own expense.

Note: To ensure compliance, properly shielded cables for data, I/O and RF connections shall be

used. Use double shielded twisted pair cables for I/O connections. We recommend to use CAT7

S/FTP cable, e.g. DRAKA UC900 SS27 Cat.7 PUR. These cables have to be shielded from end to

end, ensuring a continuous shield.

For RF connections use double shielded coaxial cable like e.g. RG223.

1.1.2 Safety compliance

This equipment has been tested and meets the specification of following safety standards:

EN 62368 Every single delivered unit is tested according to EN 60950 to ensure best

possible user safety.

To meet all safety requirements it is necessary to keep with the cabling requirements mentioned

in the installation chapter.

2 Installation

This chapter describes how to install the sat-nms LFTRX Fibre Optical Link. You find a guide how

to connect, configure and mechanically mount the equipment below.

Before you start, please first read the

important recommendations to prevent damage from the equipment.

2.1 Safety Instructions

Failure to observe all Warnings and Cautions may result in personnel injury and/or equipment

damage not covered by the warranty.

The equipment described in this manual is designed to be installed and used by

properly trained personnel only!

Safety Instructions

chapter below. It contains some

www.satnms.com

LFTRX-UM-2107 Page 4/12