Yamaha DSP-E200 Manual do Proprietário - Página 14
Procurar online ou descarregar pdf Manual do Proprietário para Sistema de altifalantes Yamaha DSP-E200. Yamaha DSP-E200 19 páginas. Natural sound digital sound field processor
Imprimir página
TO PLAY SOURCE WITH THE DIGITAL SOUND FIELD PROCESSOR
2
1
Set to the "
2
3
Select a source using the input selector on the
integrated amplifier etc.
* To select a tape deck connected to this unit's TAPE
terminals, set the TAPE MONITOR switch to on.
(Otherwise, set this switch to off.)
Note
If this unit is connected to the TAPE REC OUT terminals of
the integrated amplifier etc., the following operations should
be done.
• If your amplifier has the REC OUT selector which is
independent of the input selector;
1. Set the input selector to the AUX position.
2. Select the source to be input to this unit using the REC
OUT selector.
• If your amplifier does not have the REC OUT selector
which is independent of the input selector;
1. Set the TAPE monitor switch on the amplifier to on.
2. Select the source to be input to this unit using the input
selector.
14
3
5
VOLUME
0
— dB
∞
" position.
POWER
TAPE
MONITOR
1,6
4
Play the source.
5
Select a desired program suitable for the source.
CENTER
PRO LOGIC ENHANCED
TEST
MODE
DOLBY SUR.
The corresponding indicator will illuminate.
6
Adjust to the desired output level.
7
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on the next pages.)
DIGITAL SOUND FIELD PROCESSING
CONCERT
MONO
ROCK
CONCERT
VIDEO
MOVIE
CONCERT
HALL
PRO LOGIC
VOLUME
0
— dB
OFF