ABB MWK Manual de Instruções - Página 4
Procurar online ou descarregar pdf Manual de Instruções para Dispositivo de proteção ABB MWK. ABB MWK 16 páginas. Surge arresters
Imprimir página
2.2
Basic safety precautions
2.2.1
Product safety
The POLIM® and MWK/MWD type surge arresters have been constructed using state-of-the-
art technology and officially recognised safety-related rules. However, while they are in use,
danger to life and health of the user or third parties could arise, or damage of the surge
arresters and other property could occur.
The POLIM® and MWK/MWD type surge arresters are only to be used when they are in
X
technically sound condition, for the intended purpose, and with safety and the possible
dangers in mind while observing the operating instructions.
Keep the operating instructions intact and fully readable, and store them in such a way
X
that they are accessible to operating personnel at all times.
Decommission and replace overloaded or damaged surge arrester units.
X
2.2.2
Personnel-related measures
Train personnel in professional and safe working with high-voltage equipment.
X
Train and instruct personnel in working on the POLIM® and MWK/MWD type surge
X
arresters using the operating instructions.
Personnel being trained, instructed or just provided with a general education may only
X
work with the POLIM® and MWK/MWD type surge arresters under constant supervision by
an experienced high-voltage technology professional.
2.2.3
Organisational measures
Observe all safety- and danger-related information regarding the POLIM® and MWK/MWD
X
type surge arresters.
The safety rules of the owner of the high- and medium-voltage system and all regulations
X
of the respective national safety authorities are to be observed.
Only trained and instructed high-voltage technology professionals may be authorised to
X
work independently with the POLIM® and MWK/MWD type surge arresters.
Clearly assign areas of responsibility for working with the POLIM® and MWK/MWD type
X
surge arresters. Make them known and adhere to them.
Only personnel who have read and understood the operating instructions, especially the
X
„Basic safety precautions" section, may be allowed to carry out tasks with the POLIM®
and MWK/MWD type surge arresters.
Ensure that work is being performed in a safety-conscious way with awareness of
X
possible dangers and while observing the operating instructions.
3
Description
3.1
Intended use
The POLIM® and MWK/MWD type surge arresters are intended for use in high-, medium- and
low-voltage applications.
Surge arresters protect the insulation of devices against overvoltages which are caused by
lightning or switching operations.
The manufacturer is not liable for resulting damages from further, unintended use. The
operator accepts all responsibility for using the POLIM® and MWK/MWD type surge
arresters outside of their intended application range as specified in this document or in the
respective data sheet.
Note: MWD and POLIM® 4.5 ID surge arresters are designed for indoor use. All other POLIM®
and MWK type surge arresters are suitable for use outdoors and indoors.
4 |
Operating instructions | EN | 1HC0141361 AA