ECOPOSTURAL C3500 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Equipamento médico ECOPOSTURAL C3500. ECOPOSTURAL C3500 17 páginas. Electric table

Imprimir página

English

of the table.

When getting down the table different procedures apply depending on the position of the patient.

Therefore, if he is lying down (prone position) he has to slide gently towards the middle of the table, lean

on his side and go up by standing on his arms. He will then be able to put his legs out by the table's side

and easily stand up.

If the patient is lying upwards he will have to stand on his arms, get back to a seated position and then go

down the table.

* Caution: Never use the head or back rest sections to lean forward as these parts are not aimed at

supporting such a pressure.

c) Height adjustment

The central height of the table is operated by an electric motor.

The motor supplied in our electric tables is sent disconnected. Before plugging the table in, connect the air

pipes according to the attached instructions.

To operate the supply cable must be plugged into a 220-230 V socket.

For adjusting the height use the foot pedal. Press the foot control switch pedal: left downwards / right

upwards.

* Caution: Safely position patient before table height adjustment. Do not insert hands, feet or

garments into the moving parts of the elevating mechanism as this could result in serious injuries.

d) Sections adjustment

The head-/backrest section is operated by rack (2)

(2) Rack: Lift the section up to the required position and the rack will position itself automatically. To lower

the section, first raise it up to a certain extend or completely (as appropriate) in order to release the rack.

* The hinges on both sides must be properly fixed and positioned at the same height.

3) MAINTENANCE

* Warning: For safety reasons, disconnect the table from the electrical supply before the table

cleaning, repair or servicing.

a) Metal frame

For a proper operation of the table, you should do the dusting regularly with a cloth.

We also recommend to periodically grease the axles at the moving parts with a liquid grease spray. Lay

the couch on its side and take off the white caps protecting the nuts at the axles of the framework. Slightly

unscrew the nuts and spray the product around the loosen nuts. Leave to settle in this position for 12

hours. Tighten the nuts and put the protective white caps back on. Lay the table on the other side and

repeat.

Periodically check couch visually for any signs of damage and make sure that all bolts, nuts and other

fasteners are tight.

Please note that the repeated exposure of the table to high levels of humidity is not recommended.

b) Electric motor

Keep this piece free from any dust or grease. Absolutely avoid spilling liquids on the motor because they

could cause severe damage to the electric components despite the motor protection.

The handling of the electric motor is totally forbidden. Any manipulation will invalidate the

guarantee.

A non-stop blinking operation of the foot rail or any other height adjustment mechanism could activate the

thermal protection of the motor due to an overheating.

Examine the table periodically for any signs of damage or malfunction and contact immediately

Ecopostural or the reseller for service/ spare parts. For further information, go to annex "Frequently asked

questions about motors".

c) Upholstery

A wet cloth should be enough to do the dusting. Anyway, if the leather is not properly clean you can use a