Clark Synthesis TACTILE SOUND AW339 Manual de instalação - Página 15

Procurar online ou descarregar pdf Manual de instalação para Amplificador Clark Synthesis TACTILE SOUND AW339. Clark Synthesis TACTILE SOUND AW339 20 páginas. All-weather transducer
Também para Clark Synthesis TACTILE SOUND AW339: Manual suplementar (4 páginas), Ficha de dados (1 páginas), Manual de instalação (8 páginas), Manual de instalação (2 páginas), Manual do comprador (2 páginas), Ficha de especificações (1 páginas)

Imprimir página
Right Front (RF) and Left Front (LF) Hookup
For this hookup, connect the RF and LF Pre-Amp Outputs to the amplifier inputs.
NOTE: Not all receivers have Pre-Amp outputs for the Right Front and Left Front outputs. If you
have a question about your receiver's outputs, please consult your owner's manual or contact your
receiver's manufacturer.
Amplifier
(100 - 150
Watts into
4 ohms)
Transducer
Multiple Signal Hookup
This configuration is a little more complicated. You will need a small mixer to make this work.
Connect the signals you want to use to the mixer input. Then, connect the mixer output to the
amplifier input using a "Y" adapter.
Amplifier
(100 - 150
Watts into
4 ohms)
Transducer
www.clarksynthesis.com
Surround-Sound Receiver
L
R
OUT
IN
–
+
Output
L
R
OUT
IN
–
+
Output
Y Adapter
Wiring & Connections
Pre-Amp Audio Out
LF
RF
Surround-Sound Receiver
Pre-Amp Audio Out
LF
CENTER
CH1
CH2
OUTPUT
Mixer
Tactile Sound Transducers
RF
LFE/SUB
CH3
CH4
15