ABB POLIM Manual de Instruções - Página 7

Procurar online ou descarregar pdf Manual de Instruções para Dispositivo de proteção ABB POLIM. ABB POLIM 16 páginas. Surge arresters

Transporting, unpacking and storage

4.1

CAUTION!

Surge arresters not secured during transportation

Damage to surge arresters that have fallen during transport.

Secure the surge arresters against sliding or falling before transportation.

Observe the safety precautions printed on the packaging for proper handling during

transportation and storage.

Don't expose the disconnectors or surge arresters equipped with disconnecting devices

to temperatures above +60 °C (for exceptions, see specific product documentation).

4.2

The surge arresters provided are packaged in sturdy cardboard boxes or wooden crates.

If accessories are included in the order, the surge arresters are supplied with accessories

installed. If specifically requested, accessories are packaged separately in plastic bags and

are either included in the cardboard box or wooden crate or supplied separately in case of

large quantities.

The routine test reports for the final electrical inspection are included in the packaging

material.

After receiving the shipment, compare the order and delivery documents immediately to

check for completeness and correctness of the shipment.

In case of incompleteness or deviations, inform the supplier and shipper immediately.

Packaging material is one-way unless stated otherwise. It shall be disposed of or recycled

according to local regulations.

WARNING!

Damaged surge arresters

Material damage and personal injury due to the installation and commissioning of damaged

surge arresters.

Do not use damaged surge arresters.

Examine shipment immediately to check for damage.

Immediately notify the insurance company, the shipper and the supplier of the damage

and create a damage log.

4.3

The original packaging materials can be used for storage.

Store the surge arresters in a well-ventilated, clean room.

Remove the plastic film to prevent the formation of condensation water.

Storage temperature: –40 ... 70 °C

Storage temperature for disconnectors or surge arresters equipped with disconnecting

devices: –40 ... 60 °C (for exceptions, see specific product documentation).

1HC0141361 AA | EN | Operating instructions

| 7