Clark-Reliance Jerguson LumaStar EPL-316 Manual de Instruções de Instalação, Operação e Manutenção - Página 5
Procurar online ou descarregar pdf Manual de Instruções de Instalação, Operação e Manutenção para Luz de trabalho Clark-Reliance Jerguson LumaStar EPL-316. Clark-Reliance Jerguson LumaStar EPL-316 12 páginas.
Também para Clark-Reliance Jerguson LumaStar EPL-316: Manual de Instruções de Instalação, Operação e Manutenção (12 páginas)
Imprimir página
4
UNIVERSAL BRACKET INSTALLATION ONTO GLASS GAUGE
®
*NOTE: Illuminators pictured are for reference only. The mounting instructions are the same across all Jerguson
TM
Lumastar
models. Model EPL-316 mounts in the same manner except the power supply is always remote mounted.
Identify your bracket type. Confirm the bracket style matches that in the below pictures. If the bracket received does not
match the illustrations below, see page 5 or 6 for alternate bracket styles.
Figure 5
Figure 6
Step 1: Check to make sure brackets are properly assembled on the illuminator. The cable should be fed through the stud
protruding from behind the illuminator, locking in the bracket as shown above in Figure 2. One end of the cable should be
crimped into an oval for pulling leverage and the other should be crimped securely around a thumb nut.
Figure 7
®
™
Step 2: Press Jerguson
LumaStar
assembly against rear of gauge as shown in Figure 3, aligning the bracket cutouts
nd
over the gauge bolt heads as shown. Align the brackets with the 2
set of bolts in from each end of the gage, when possible.
Note that all one-section size 7 models and smaller will require the power supply to be remote mounted.
16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
www.clark-reliance.com ● [email protected]