Caliber HFB 300 Manual - Página 6

Procurar online ou descarregar pdf Manual para Acessórios para automóveis Caliber HFB 300. Caliber HFB 300 9 páginas.

Imprimir página

HFB300manual_GB

15-05-2008

ENGLISH

Similar pairing procedures described in the previous Section can be used.You can follow the user

guide of the Bluetooth equipment to complete paring operations on the equipment side.This

handsfree can paired with up to 8 Bluetooth equipments (including mobile handsets).The corres-

ponding 8 sets of pairing information are recorded by the handsfree. Each paired equipment can

wireless communicated with the handsfree after setting up a Bluetooth connection. Please check

Section 2.4.4 on procedures to set up a Bluetooth connection.

2.4.3 Erase all Paired Records

This handsfree can paired with up to 8 Bluetooth equipments.When Handsfree in the Paring

Mode, long press K4, it will erase all paired profiles and quit pairing mode. At this time, Blue LED

gives 1 blink per 3 seconds.

2.4.4 Connecting/Disconnecting your Handsfree with Bluetooth Equipment

When the handsfree communicates with a Bluetooth equipment with Handsfree Profile, the

Bluetooth connection between two equipments shall be established in advance. If two Bluetooth

equipments have been paired recently, you can simply reconnect them.

Connecting your Handsfree with Bluetooth Handset:

Initiating a request from either the handsfree or the handset can set up Bluetooth connection.The

detailed operations are as follows:

1. Initiating connection request from the Handsfree: Place the handsfree close to the Bluetooth

handset and then short press K2.

2. Initiating connection request from the Bluetooth handset: Place the handsfree close to the

Bluetooth handset and then follow the handset user guide to find the handsfree and send

connection request.

After connecting, you will hear a connecting tone, and then Blue LED gives 3 quick blinks per

2 seconds.

Disconnecting your Handsfree with Bluetooth Handset:

When handsfree connected with bluetooth handset, you can disconnect them as follows:

1. Long press K2.

2. Refer to handset's manual to initiate the connection from the handset side.

After disconnecting, you will hear a disconnecting tone, and then Blue LED gives 1 blink per

3 seconds.

2.5 Call Functions

2.5.1 Call

Before dialing, both your handsfree and handset must be power on. And you also need to ensure

your handsfree and handset has been linked with Bluetooth connection.

Answer Call: Short press K2.

Reject Call: Long press K4.

End Call: Short press K2.

Redial: Long press K3.

The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.

15:54

Pagina 11

2.5.2 Adjusting Handsfree Volume

In the talking mode, you can short press K3/K4 to increase/decrease your speaker volume, and the

Blue LED gives 3 quick blinks per 2 seconds.You can repeat the above operation to speaker volu-

me to a desirable level.

Note: For most Bluetooth headset, handsfree volume control will synchronize with the handset.

That is, your handsfree volume can also be controlled your handset, vice versa. However, this may

not be always true due to variations on handset implementations chosen by different

manufactures.

2.5.3 Mute

You can mute or un-mute an ongoing call by simultaneously quick pressing K3 and K4.The Blue

LED gives 3 quick blinks per 2 seconds and the Red LED is off.

2.5.4 Transferring Calls to/from your Handset

Transferring calls to your handset: long press K2, Blue LED gives 1 blink per 3 seconds; Red LED is

off.

Transferring calls from your handset: short press K2, and Blue LED gives 3 quick blinks per

2 seconds.

2.5.5 Voice Dialing

If your mobile phone supports voice dialing, you can make a call via voice dialing from your

Handsfree:

Voice Dialing: Long press K4: you will hear key tone£¨and Blue LED gives 3 quick blinks per 2

seconds, then follow your handset user guide to complete voice dialing.

Cancel Voice Dialing: Short press K4.The Blue LED gives 3 quick blinks per 2 seconds and the

Red LED is off.

2.5.6 Advanced Call Functions

If your mobile phone has call waiting/conference functions, this Bluetooth Handsfree can support

the function by following operations:

1. A new call comes in,While you are in talk:

1) Long press K3, to hold active call and accept incoming call.

2) Short press K2, to end active call and answer new call.

2.When two calls in progress, one is active and the other is on hold:

1) Long press K3, to toggle hold call and active call.

2) Short press K2, to end active call and accept hold call.

3) Long press K4, to make conference.

The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.