Directed XPRESSKIT solex DLCH-CHDL6+ Manual de instalação - Página 4
Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis Directed XPRESSKIT solex DLCH-CHDL6+. Directed XPRESSKIT solex DLCH-CHDL6+ 5 páginas.
Imprimir página
MODEL: DLCH-CHDL6+
STEP #1 PROGRAM THE TYPE
1
Connect module to the 10-pin harness, LED will go
ON to confirm correct connection.
2
Insert the key and turn to the ON position (without starting
the engine). LED will turn off, then flash once if the module
has never been programmed or has been reset to default.
To change the vehicle type, press and
3
release the program button until LED flash
pattern matches the selected vehicle type.
LED flash pattern will match the Vehicle
Type selected.
To save the vehicle type selection, press and hold
the program button until the LED flash rapidly. The
4
module will then exit the programming and will be
ready to operate.
*If LED comes on solid, turn the key to start
the engine.
STEP #2 USER SETTINGS (OPTIONAL PROGRAMMING)
(Only MODES 7 & 8 are available.)
Key "OFF" position, press and hold
1
program button for 2 seconds, LED
will flash rapidly for 2 seconds.
Release button, LED will identify the
MODE selection with a slow flash
2
pattern (1- 8 slow flashes) and then
will identify OPTION selection with a
fast flash pattern. (1 or 2 fast flashes)
To change MODE, press
the programming button
3
once, LED will confirm
MODE with a slow flash
pattern (1-8 slow flashes).
To change OPTION SELECTION
within a MODE, press LOCK or
4
UNLOCK button on the aftermarket
remote control system. The LED
will identify option selection with
either one or two fast flashes.
5
To save and exit programming, press and hold button until LED
flashes once rapidly, showing end of MODE & OPTION programming.
* = Default
MODE 7 =
*OPTION 1: Vehicle with alarm (Default)
MODE 8 =
*OPTION 1: No reset (Default)
PRESS & RELEASE
PRESS & HOLD
KEY
RELEASE
THEN
SLOW FLASH
PRESS 1x
(
(
or
THEN
PRESS 1x
OPTION 2: Vehicle without alarm
OPTION 2: Complete reset of option and module
KEY#1
THEN
FLASH
UNTIL
FLASH RAPIDLY
PRESS AND
HOLD 2 SEC
THEN
SLOW FLASH
(MODE)
SLOW FLASH ONCE = MODE 1
SLOW FLASH TWICE = MODE 2
......
SLOW FLASH 7 TIMES = MODE 7
SLOW FLASH 8 TIMES = MODE 8
(MODE)
FAST FLASH ONCE = OPTION 1
FAST FLASH TWICE = OPTION 2
FAST FLASH
(OPTION)
PRESS & HOLD
© 2009 Directed Electronics. All rights reserved.
Rev.: 20090219
THEN
ON
THEN
OFF
FLASH 1X
FLASH ONCE = TYPE 1
FLASH TWICE = TYPE 2
THEN
RELEASE
THEN
FLASH 2 SEC
THEN
FAST FLASH
(OPTION)
UNTIL
FLASH ONCE
RAPIDLY