Clarke 6462182 Instruções de funcionamento e manutenção - Página 9

Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramenta eléctrica Clarke 6462182. Clarke 6462182 20 páginas.

INSTALLING/CHANGING BLADES

1. With the jigsaw disconnected from

the mains supply, slacken off the

two blade securing screws, using

the hexagonal key stored in the

bottom of the jigsaw body.

• The key must be inserted through

the slots in the blade guard.

2. Remove existing blade.

3. Select the saw blade appropriate

for the job in hand, and insert it in to

the blade holder as far as it will go, with the teeth facing forwards.

4. Tighten the two blade securing screws progressively, until the blade is held

firmly. Ensure that the blade is straight and resting against the blade

support roller. Pull the blade to check that it is secure before re-

connecting the power supply.

• Take care that the saw blade is not touching anything before you start the

saw. Take care never to use cracked, blunt or damaged blades.

IMPORTANT: DO NOT plug in to the mains, unless you have ensured the jigsaw

is switched OFF. To do this, squeeze the trigger fully upwards, then release it.

The trigger is located under the grip.

1. Ensure that the workpiece being cut is securely held in place and that the

cut line is clearly marked.

2. Connect the vacuum extract port

to an extract system wherever

possible.

3. Place the sole-plate on the

workpiece taking care that the

saw blade is vertical and correctly

positioned in relation to the cut line

without touching it.

4. To start the saw, squeeze the

trigger. Wait until the blade is

running at speed before

attempting to cut the workpiece.

5. To stop the saw if the trigger lock-on button is used, squeeze the trigger

fully in, then release it and the motor will stop.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]