Clarke CHT204 Instruções para o utilizador - Página 2

Procurar online ou descarregar pdf Instruções para o utilizador para Ferramenta eléctrica Clarke CHT204. Clarke CHT204 4 páginas.

INTRODUCTION

Thank you for purchasing this CLARKE ½" square drive Torque Wrench.

This torque wrench is designed to tighten nuts with precision. It should NOT be

used for UNDOING nuts, as severe damage could occur. With correct use, this

wrench will produce an accuracy of plus or minus 3%, and you can hear and

feel when the desired torque setting has been reached. With careful and

considerate use, it will give years of reliable service.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

USING YOUR TORQUE WRENCH

TORQUE SETTING ADJUSTMENT

Example: To set the torque to 6.2 kilogram metres (kg/m).

1. Ensure the lock nut (1) is loosened, by turning it anti-clockwise. Turn the

knurled handle until the zero mark on the chamfered scale (3) is in line with

the next lowest graduation on the linear scale (4). In this case it would be

5.7.

2. Continue to turn the knurled handle, five more graduations. (1 graduation

equals 0.1kg/m). The wrench is now set at 6.2kg/m.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]