ALE Coral 144 Manual do operador - Página 14

Procurar online ou descarregar pdf Manual do operador para Impressora ALE Coral 144. ALE Coral 144 18 páginas.

ALE

To prime the system, proceed as follows :

From the print menu, Press the "Purge" key. It leads to the Purge Menu (Fig. 17).

●

This menu offers 3 options:

Jet : primes the circuit at high pressure

–

Test : prints with all nozzles

–

Norm : primes the circuit at low pressure

–

Each print-head has to be primed independently

●

To ink up the circuit "from dry" the "Jet" prime is used first (Fig. 18).

●

Press

. You should hear the pump "load" (the whirring noise slows down when the

●

pumps fills in with ink) Repeat this operation until

Prime once more using the "Jet" function to remove air from the ink circuit.

●

Prime at least once using the "Normal Prime" function. This is done to remove the

●

remaining air bubbles from the circuit.

Carefully wipe excess ink off (Fig. 19).

●

with a special "non wetting coating" which is self cleaning.

Coral144 Operator Manual

Design • Print • Trace

Fig. 17: Master Series prime menu access

Fig. 18: MasterPad prime menu

WARNING :

The pump pressure in "inking up" mode is maximum and

ink will jet out!!!

ink jets out of the

Do not touch the nozzle plate

03/12/2010

print-engine.

: it is coated