ALE TC Series Manual do operador - Página 17

Procurar online ou descarregar pdf Manual do operador para Impressora ALE TC Series. ALE TC Series 18 páginas.

3 Printer operation

3.1

While the printer is in operation, it is necessary to replace the empty ink bottle before the

internal reservoir goes empty as well. The printer reservoir has an optical ink-low detection

mechanism, which will sending warnings just before the reservoir becomes empty : it will

turn on the red LED on top of the printer, and send an ink-low signal to the controller. After

a configured number of prints, if the ink level is still low in the reservoir, the controller

stops the printing (to avoid defective printings). See the controller manual for information

on configuring the number of prints after the ink-low signal.

To replace the ink bottle, proceed as follows:

remove the empty ink bottle from the printer (Fig. 23)

–

Using a craft knife (or a sharp blade), cut the round raised plastic dome on the top of

–

the new ink bottle cap (Fig. 14).

Turn the bottle up-side down and push into the reservoir (Fig. 15).

–

3.2

The printer requires a service every year for routine maintenance and inspection (filters,

o-rings replacement, visual inspection...). Please contact your ALE distributor to have your