Clarke STRONG-ARM CSA10BB Manual de Instruções de Operação e Manutenção - Página 6
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramenta eléctrica Clarke STRONG-ARM CSA10BB. Clarke STRONG-ARM CSA10BB 17 páginas. 10 tonne hydraulic bench press
Imprimir página
9. If obtained, bolt the mandrel
storage bracket to the side of the
frame using the bolts supplied.
10. Store the mandrels (if obtained)
including the adaptor, in their
positions on the bracket.
11. Insert the bed support pins into
the holes in the columns at the
required position. Then set the
bed frame in position on the pins.
HYDRAULIC PUMP/RAM OPERATION
1. Before using the press, purge any
air from the system by opening
the release valve by turning it anti-
clockwise and pumping several
full strokes to eliminate any air
bubbles. Tight the release valve
before continuing.
2. Check all parts are secure and
correctly aligned before using the
press.
The press is now ready for use.
POSITIONING THE BED
1. Position the bed at the desired height, so it will be as close as possible to
the ram when the workpiece is mounted on it.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6