Directed Directechs DB3 Manual de instalação - Página 6

Imprimir página

Directed Directechs DB3 Manual de instalação

Wiring diagram

with

T-Harness (THNISS3D)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (

BCM

(behind instrument cluster)

Clock & Data Wire

at NATS Connector

(behind Push-to-Start

button)

BCM

(black 40-pin conn.

behind instrument cluster)

HS CAN Low:

Pink, pin 40

HS CAN High:

Blue, pin 39

(-) Hood Input

(-) Ground

(+) 12V Input

(+) Starter Output

(+) Ignition Input

(-) Lock Output

(-) Unlock Output

(+) Parking Light Output

This is a mandatory connection. Refer to

the Vehicle connections section for the

corresponding connector, pin and

wire color of your vehicle.

Refer to the

Additional mandatory connections

section for connection details.

403.NISS4HT 2.36 2023 Nissan Armada (Smart Key)

T-02

NOT

T-01

B-02

B-01

NOT USED

Hood Pin

BCM

(white 15-pin conn.)

5 6 7 8 9

Yellow, pin 15

White 4-pin conn.

(brake switch)

(+) Brake:

Red, pin 2

T-02

USED

T-01

Cut the Tan and Tan/Black

Brake Switch T-Harness

and extend the wire coming

from the module side and

connect them to the CAN

wires at the vehicles BCM.

HS CAN Low: Tan

Extend Wires

HS CAN High: Tan/Black

(+) Ignition Status Output: Violet/Brown

(+) Ignition Status Input: Violet/Green

(-) Push-to-Start Output: Green/Black

(-) RAP Off Output: Red/Black

(+)12V:

(-) PTS:

Lt. Blue, pin 4

PTS Switch

(brown 8- pin conn.)

Diagnostic Connector OBDII

THNISS3D

(optional T-Harness)

(-) Driver Door Trigger:

Gray/Red, pin 7

5 6

BCM

(black 15-pin conn.)

D2D

only

Do NOT

Connect

White/Black: N.C.

XKD2D65