Zanussi ZBB 7266 Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Frigorífico Zanussi ZBB 7266. Zanussi ZBB 7266 16 páginas. Zanussi washer dryer brochure
Também para Zanussi ZBB 7266: Especificação (5 páginas), Folheto de instruções (24 páginas), Especificações (7 páginas)

Imprimir página

Remove the correct part

from the hinge cover (E).

Make sure to remove the

part DX, in the case of right

hinge, SX in opposite case.

Push the part (Hc) on the

part (Ha).

Press the part (Hd) on the

part (Hb).

Do a final check to make sure that:

Attach the covers (C, D) to

the lugs and the hinge

holes.

Install the vent grille (B).

Attach the hinge covers (E)

to the hinge.

8 mm

Open the appliance door

and the kitchen furniture

door at an angle of 90°.

Insert the small square (Hb)

into guide (Ha).

Put together the appliance

door and the furniture door

and mark the holes.

Fix the appliance to the

side of the kitchen unit, fit

the bracket (E) and (F), ad-

just the distance, and fix

using the screws (as in fig-

ure).

Fit the cover (D).

Disconnect the parts (Ha),

(Hb), (Hc) and (Hd).

8 mm

Remove the brackets and

mark a distance of 8 mm

from the outer edge of the

door where the nail must be

fitted (K).

• All screws are tightened.

ca. 50 mm

90°

21 mm

90°

ca. 50 mm

21 mm

Install the part (Ha) on the

inner side of the kitchen

furniture.

Place the small square on

the guide again and fix it

with the screws supplied.

Align the kitchen furniture

door and the appliance

door by adjusting the part

Hb.