Zanussi ZFC 1505 S Folheto de instruções - Página 5

Procurar online ou descarregar pdf Folheto de instruções para Frigorífico Zanussi ZFC 1505 S. Zanussi ZFC 1505 S 10 páginas. Refrigerator zfc 1505 s; zfc 1503 s

Imprimir página

Changing the opening direction of the door

Unplug the freezer before performing the following

operations:

Remove the ventilation grid (C).

Unscrew the bottom hinge (D).

Remove the door from the upper pivot (A).

Remove the pivot from the upper hinge (B), then

mount it on the opposite side.

Re-assemble the door.

Screw down the bottom hinge (D) on the opposite

side by using the screws previously removed.

Detach the plug (E) from the ventilation grid (C). To

do this, press it in the direction of the arrow.

Introduce the plug into the hole left free on the

opposite side.

Re-assemble the ventilation grid.

Remove the screw cover on the handle, unscrew the

handle and reﬁt it on the opposite side.

The unused opening direction is concealed by plastic

plugs. Therefore, these plugs are to be mounted on

the holes left free.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the

cabinet. If the ambient temperature is cold (i.e. in

Winter), the gasket may not ﬁt perfectly to the

cabinet. In that case, wait for the natural ﬁtting of

the gasket or accelerate this process by heating up

the part involved with a normal hairdrier.

Inner door reversal

(Only for model ZFC 1503 S)

Using a screwdriver release bracket (1) by pressing

on the internal spring (Fig. 5) and withdraw it from

its seat together with the door;

remove plug (2) and ﬁt it in the hole left open on the

opposite side;

turn the door through 180 , remove the bracket (1)

and reﬁt it on the opposite side.

Reﬁt the door and insert the top pin and bottom

bracket (1), pushing it into place.

To ensure correct storage of food, the door is ﬁtted

with a simple spring device which holds it in the

open position until it is properly closed.

D229

D230

D162

180°

PR140

Fig. 2

Fig. 3

Fig. 4

Fig. 5