Directed Directechs DB3 Manual de instalação - Página 16

Feature and option list

Depending on your vehicle, some of the features and options listed below may need to be configured using the configuration tool found on

the module flashing page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible

using the information on this page.

* Default option

Feat

Operation

Flashes / Option

1. No RF Output*

RFTD Output Type

2. RFTD Output

3. SmartStart

1. Driver priority*

Unlock Driver Priority

2. All

1. Trunk*

Trunk

2. Tail Glass Opening

1. Trunk

Aux1

1. Disabled

Smart OEM Alarm

Control

2. Safelock

403.TL1 5.07.106 2013 Toyota Highlander (Smart Key)

Description

Module is connected to a remote starter using a standard installation.

Module is connected to an XL202 using an RSR or RXT installation (when available).

Module is connected to SmartStart using an RSR or RXT installation (when available).

Unlocks only the driver door when the button is first pressed, and unlocks all doors when it is pressed a second

time within 5 seconds.

Unlocks all doors when the button is first pressed.

Will pop the trunk if available.

Will open the tail glass if available.

Will pop the trunk if available.

The OEM alarm will not be controlled by the interface upon remote start. No disarm or arm command will be

executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the

beginning of the sequence, and relock after start and shutdown.