Zanussi ZI 7165 Folheto de instruções - Página 16

Procurar online ou descarregar pdf Folheto de instruções para Frigorífico Zanussi ZI 7165. Zanussi ZI 7165 16 páginas. Zanussi refrigerator
Também para Zanussi ZI 7165: Folheto de instruções (21 páginas), Folheto de instruções (9 páginas), Folheto de instruções (20 páginas)

Imprimir página

Apply covers (B) on joint cover lugs and hinge holes.

Position the runners (H) at the top and bottom of the

inside of the kitchen unit as shown in the figure and

mark the position of the external holes.

After preparing the holes, screw the runners to the

kitchen unit door using 3,5x16 mm screws.

D094

Open both the appliance door and that of the kitchen

unit to approx. 90°.

8mm

Place the little plates over the runners. Hold the doors

of the appliance and the unit together and mark the

holes.

PR34

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little plates over the

runners and screw in the screws provided (3,5x16

mm). For the alignement of the kitchen unit door, if

necessary, use the clearance size of the slotted holes.

At the end of the procedure, check that the doors of

the appliance and the kitchen unit open properly.

PR35