Zanussi ZKN20/10S Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Frigorífico Zanussi ZKN20/10S. Zanussi ZKN20/10S 17 páginas.
Também para Zanussi ZKN20/10S: Manual do utilizador (15 páginas)

Imprimir página

Installation

Positioning

• Place the refrigerator away from direct sunlight and

heat sources.

• Take off at least 50 mm. free over the appliance.

• Never put something on the ventilator of the applian-

ce. (see fig. 1).

• Make sure the refrigerator is accurately levelled tur-

ning the adjustable feet on the front, in order to avoid

vibrations and noises and to make sure that the doors

shut properly (see fig. 2).

• Before placing the plinth cover, pull out the fixing

part of doors used only for security during transport

(see fig. 3).

• With the freezer door wide-open, assemble the socle

provided inside the appliance, following the instruc-

tions stuck on it.

• Remove the shelves transport fastening red pieces

by sliding them (see fig. 4).

• The appliance should not be located in places with

maximum temperatures more than:

+ 32°C for N/SN Class (classification on rating

plate).

+ 43°C for T/ST Class (classification on rating

plate).

If the temperatures are higher than those mentioned

above, the functioning and the safety of the applian-

ce could be affected.

Cleaning the interior

• Do not use alcohol or any cleaning produts contai-

ning alcohol because they could damage the plastic

parts of the appliance.

• Before using the appliance for the first time, wash

the interior with luke warm water and a neutral soap.

This will help to remove the typical smell of a new

fridge/freezer. Afterwards dry thoroughly.

• Do not use detergents or abrasive powders as these

will damage the finish.

• Remove security elements used for transportation.

Electrical connection

mBefore plugging the appliance into a socket make

sure that the voltage and frequency shown on the

rating plate correspond to your home supply. (see

fig. 5).

It is essential that the appliance should be properly

earthed.

mFor this purpose the supply cable plug incorporates

a special earth contact. If the sockets of your domes-

tic wiring system are not earthed, have the appliance

connected to a separate earth wire in accordance

with existing safety regulations.

Fig. 1

Fig. 2

Fig. 3

Fig. 4