Zanussi ZRME38FW2 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Frigorífico Zanussi ZRME38FW2. Zanussi ZRME38FW2 24 páginas.

• For Side by Side niche installation please refer to the Joining Kit provided with the

cabinet freezer and its installation manual (NOTE: joining kit is also available separately

as accessory)

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep it in

an upright position for at least 3 hours before plugging into the mains. This

allows efficient operation and prevents damage to the compressor.

• Your fridge may have a smell when it is operated for the first time. This is normal and the

smell will fade away when your fridge starts to cool.

Internal lighting

WARNING!

Risk of electric shock.

• Concerning the lamp(s) inside this product and spare part lamps sold separately: These

lamps are intended to withstand extreme physical conditions in household appliances,

such as temperature, vibration, humidity, or are intended to signal information about

the operational status of the appliance. They are not intended to be used in other

applications and are not suitable for household room illumination.

Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a specially earthed plug.

Important: Do not use the appliance without the fuse cover in position. Should the

fuse need to be replaced, it must be replaced with a 13A fuse, ASTA approved to BS1362.

The plug must be used with a specially earthed socket of 13 amperes. If there is no such

socket in your house, please have one installed by an authorised electrician.

The mains lead of this appliance has been fitted with a BS

1363A 13A fused plug. To change a fuse in this type of plug,

follow the steps below:

1. Remove the fuse cover and fuse.

2. Fit replacement 13A fuse, ASTA approved to BS 1362 type,

into the fuse cover.

3. Replace fuse cover.

EN -10-