Zanussi ZT 45 Folheto de instruções - Página 5

Procurar online ou descarregar pdf Folheto de instruções para Frigorífico Zanussi ZT 45. Zanussi ZT 45 17 páginas.

Operation

The temperature inside the refrigerator and freezer is

regulated by a single thermostat with 6 temperature

positions and one «OFF» (O) position.

Position 1 = minimum cold

Position 6 = maximum cold

Turn the thermostat dial to the required position;

the intermediate position is usually the most suit-

able.

The thermostat setting can vary as the temperature

inside the refrigeration compartment depends on the

following factors:

- room temperature

- how often the door is opened

- how much food is stored

- position of the appliance

lmportant

If the fridge is not defrosting correctly, it is possible

that because a very low temperature has been select-

ed, the motor is working continuously, which prevents

the defrost cycle from operating.

To ensure correct defrosting, a lower number should

be selected on the thermostat and you should notice

that the motor cuts out from time to time, which is cor-

rect.

If you wish to return to a lower temperature, turn the

thermostat to a higher number, however you should

turn the setting lower occasionally to allow

automatic defrosting.

The appliance is designed to operate in room temper-

atures of 16°C to 32°C, or down to 10°C if the ambi-

ent switch is switched on. The ambient switch should

be switched on when the room temperature drops

below 16°C (the incorporated lamp will illuminate). If

the room temperature drops below the above figures

the temperature in the freezer may rise above -18°C,

when safe storage of frozen can no longer be guaran-

teed. It is most likely that the ambient switch will need

to be depressed throughout the winter to allow for the

low overnight temperatures. No damage can be

caused by leaving the switch in this position for a peri-

od of time.

A. Thermostat dial

B. Ambient switch

D325