Zanussi ZU 7115 Folheto de instruções - Página 13
Procurar online ou descarregar pdf Folheto de instruções para Frigorífico Zanussi ZU 7115. Zanussi ZU 7115 16 páginas. Larder-refrigerator
Também para Zanussi ZU 7115: Folheto de instruções (20 páginas)
Imprimir página
Important
The guide is only suitable for use in the model
supplied and accurate temperature guidance
cannot be guaranteed if transferred to other
appliances.
The guide will not work in the freezer
compartment.
Starting the appliance
Check that the shelf with the Cool Check is
positioned correctly (as described previously).
Close the door and leave the appliance
overnight to allow the temperature to reach a
safe level. If after waiting overnight the
temperature guide stili shows TOO WARM,
adjust the thermostat to a higher number, close
the door and allow to stand overnight. A higher
thermostat setting may be required to keep the
fridge temperature at the safe storage level
during warmer weather. For more information
on starting you appliance, see "Operation".
Everyday use of the cool check
temperature guide
During everyday use a fridge door is opened
many times and as a result temperature
fluctuation may occur. A Zanussi fridge is
designed to cope with any changes in
temperature but under certain conditions the
temperature guide in the appliance may show
TOO WARM.
What to do if the Cool Check temperature
guide shows TOO WARM
The Cool Check guide may show TOO WARM
if:
1. The fridge is switched off.
ACTION: Start the appliance in accordance
with the instructions.
2. The fridge door has recently been
opened or is left open for more than
approximately one minute.
ACTION: As mentioned before the
temperature guide is sensitive to changes in
fridge temperature and opening the fridge
door for prolonged periods may cause the
guide to show TOO WARM. This should not
cause concern as such fluctuations in
temperature do not generally affect the safe
storage of food. Leave the fridge door closed
for as long as possible so the temperature
returns to a safe level, the guide should then
appear black.
3. The fridge has been loaded with fresh
shopping.
ACTION: When fresh shopping or additional
quantities of food are placed in the fridge, the
temperature may rise and cause the guide to
show TOO WARM.
Do not adjust the thermostat as the time
taken for the guide to appear black will
depend on the quantity and the temperature
of food introduced.
4. The fridge temperature is above the
recommended maximum for the safe
storage of all food types.
ACTION: To lower the fridge temperature,
adjust the thermostat, then leave the
appliance overnight before checking the
guide again.
5. If the guide is still showing TOO WARM,
adjust the thermostat again, to a colder
setting, and leave the appliance overnight
before checking the guide again.
Defrosting
Refrigerator
The refrigerator automatically defrosts every
time the compressor stops.
The water is discharged, via the pipe, into a try
located at the back of the appliance above the
compressor, where it evaporates .
Important
To avoid defrost water overflowing into the
fridge, periodically clean the water discharge
hole in the centre of the V shaped drip collector
at the back of the refrigerator compartment
behind the fruit and vegetable drawer. Use the
special cleaner provided which you will find
already inserted into the discharge hole
(Fig.14).
Remember to wash the defrost cleaner in hot
soapy water at regular intervals. Dry thoroughly
before replacing.
D037
Fig. 14
13