Zanussi ZUD 7154 Folheto de instruções - Página 5

Procurar online ou descarregar pdf Folheto de instruções para Frigorífico Zanussi ZUD 7154. Zanussi ZUD 7154 12 páginas.

Imprimir página

Location

Fig. 1

This appliance is designed to be built-in to a

space having the dimensions given in Fig. 1.

Fig. 2

The height of the appliance can be altered if

required by means of adjustable feet situated at

100-170

D506

its base (Fig. 2).

Fig. 2

Door reversibility

Remove the two screws which fix the upper

hinge to the door.

Fig. 3

Carefully lean the appliance on its back and

remove the plastic insert (Fig. 3).

Remove the two screws which fix the lower

hinge to the door.

Remove the four screws which fix the lower

D507

hinge to the base of the appliance and remove

Fig. 3

the hinge itself; be very careful to recover all the

screws.

Remove the four screws that fix the upper hinge

to the appliance and remove the hinge itself.

Fig. 4

Take the hinge removed from the upper part of

the appliance on the opposite side (see Fig. 4)

and using the screws removed from the lower

part, fıx it to the base of the appliance itself.

Remove and refit the other hinge on the upper

D447

part of the appliance on the opposite side. Fix

Fig. 4

the two front screws into the upper and lower

hinges (Fig. 4).

Finally, check the alignment of the door and

make sure it closes properly. After having

reversed the opening direction of the door,

discard the original plastic insert removed and

fit the insert supplied with the appliance on the

opposite side.

Fig. 5

D510

Place the appliance in the position where it is to

be built in (Fig. 5) The appliance is fitted with

Fig. 5

adjustable feet; screw the front and rear feet in

or out to adjust the height of the appliance to

that of the recess.

Keeping the appliance central in the recess,

slide it in until its back touches the wall.

With a tape measure (or similar instrument),

measure distance (A) between the top edge of

the door and the top edge of the decorative

panel, placing it next to the recess.

D467