Zanussi ZOB65301 Manual do utilizador - Página 19
Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOB65301. Zanussi ZOB65301 28 páginas.
Imprimir página
Cleaning the cavity embossment
The cleaning procedure removes limestone
residual from the cavity embossment after the
humidity cooking process.
We recommend to do the cleaning
procedure at least every 5 - 10 True
Fan Cooking PLUS cycles.
1. Put 250 ml of white vinegar into the cavity
embossment at the bottom of the oven.
Use maximum 6% vinegar without herbs.
2. Let the vinegar dissolve the residual
limestone at the ambient temperature for 30
minutes.
3. Clean the cavity with warm water and a soft
cloth.
Cleaning the door gasket
• Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact an Authorised
Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
Aqua cleaning
The Aqua cleaning procedure uses humidity to
help remove remaining fat and food particles
from the oven.
1. Put 200 ml of water into the cavity
embossment at the bottom of the oven.
2. Set the True Fan Cooking PLUS function
and press the Plus Steam button
3. Set the temperature to 90 °C.
4. Let the appliance operate for 30 minutes.
5. Deactivate the appliance and let it cool
down.
6. When the appliance is cool, clean the inner
surfaces of the oven with a cloth.
WARNING!
Make sure that the appliance is
cool before you touch it. There is
a risk of burns.
Cleaning the oven door
The oven door has two glass panels. You can
remove the oven door and the internal glass
panel to clean it.
www.zanussi.com
The oven door can close if you try to
remove the internal glass panel
before you remove the oven door.
CAUTION!
Do not use the appliance without the
internal glass panel.
Open the door fully
1
and hold the two
door hinges.
Close the oven door
3
halfway to the first
opening position.
Then pull forward and
remove the door from
its seat.
.
Release the locking
5
system to remove the
internal glass panel.
Lift and turn the
2
levers on the two
hinges.
Put the door on a soft
4
cloth on a stable
surface.
90°
Turn the two
6
fasteners by 90° and
remove them from
their seats.
19