Zanussi ZOCND7K1 Manual do utilizador - Página 28

Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOCND7K1. Zanussi ZOCND7K1 37 páginas.
Também para Zanussi ZOCND7K1: Manual do utilizador (33 páginas)

Imprimir página

Turn off the oven and wait until

it is cold.

Step 1

Set the function and the oven

temperature:

To stop the cleaning before it finishes turn the knob for the heating functions to the off position.

CLEANING REMINDER

The oven reminds you when to clean the oven with:

catalytic cleaning.

CATA - flashes in the display for 10 sec after each

activation and deactivation of the oven.

- press at the same time to turn off the

reminder.

HOW TO USE: AQUA CLEAN

This cleaning procedure uses humidity to remove

remaining fat and food particles from the oven.

HOW TO REMOVE AND INSTALL: DOOR

The oven door has three glass panels. You can remove the oven door and the internal glass panels to clean

them. Read the whole "Removing and installing door" instruction before you remove the glass panels.

CAUTION! Do not use the oven without the glass panels.

Step 1

Open the door fully and hold both

hinges.

Step 2

Lift and turn the levers fully on both

hinges.

Before the catalytic cleaning

Remove all accessories.

Clean the oven with catalytic cleaning

After cleaning, turn the knob for

the oven functions to the off posi-

tion. When the cleaning ends the

250 °C

signal sounds. Press any button to

Step 2

turn off the signal.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Clean the oven floor and the

inner door glass with warm wa-

ter, soft cloth and mild deter-

gent.

Step 3

When the oven is cold,

clean the cavity with a wet

soft cloth.

Pour water into the cavity emboss-

ment: 200 ml.

Set the function:

Set the temperature to 90 °C.

Let the oven work for 30 min.

Turn off the oven.

Wait until the oven is cold. Dry the

cavity with a soft cloth.