Zanussi ZOD35802XK Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOD35802XK. Zanussi ZOD35802XK 29 páginas. Built-in double oven
Também para Zanussi ZOD35802XK: Manual do utilizador (25 páginas)
Imprimir página
Disconnect the appliance from the power supply before
•
carrying out any maintenance.
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
The means for disconnection must be incorporated in the fixed
•
wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off before
•
replacing the lamp to avoid the possibility of electric shock.
WARNING: The appliance and its accessible parts become hot
•
during use. Care should be taken to avoid touching heating
elements.
Always use oven gloves to remove or put in accessories or
•
ovenware.
To remove the shelf supports first pull the front of the shelf
•
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
•
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Follow the installation instructions supplied with
the appliance.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Do not pull the appliance by the handle.
•
Install the appliance in a safe and suitable place
that meets installation requirements.
•
Keep the minimum distance from other
appliances and units.
•
Before mounting the appliance, check if the
oven door opens without restraint.
•
The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
•
The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum
height (Cabinet under
the worktop minimum
height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
875 mm
560-570 mm
550 mm
888 mm
872 mm
3