Zanussi ZOF35501XK Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOF35501XK. Zanussi ZOF35501XK 24 páginas. Product manaul

Imprimir página

Stainless steel or aluminium applian-

ces:

Clean the oven door with a wet sponge only.

Dry it with a soft cloth.

Do not use steel wool, acids or abrasive materi-

als as they can damage the oven surface.

Clean the oven control panel with the same

precautions

Catalytic walls

The walls with a catalytic coating are self-

cleaning. They absorb fat which collects on

walls while the oven operates.

To support this self-cleaning process heat

the oven without any food regularly:

1. Open the oven door.

2. Remove all accessories from the oven.

3. Close the door.

4. Set the maximum oven temperature and let

the oven operate for 1 hour.

5. Clean the oven cavity with a soft and damp

sponge.

Caution! Do not attempt to clean catalytic

surfaces with oven sprays, abrasive

cleaners, soap or other cleaning agents. This

may damage the catalytic surface.

Discolouration of the catalytic surface has

no effect on catalytic properties.

Shelf Support Rails

You can remove the shelf support rails to clean

the side walls.

Removing the shelf support rails

Pull the front of

the shelf support rail

away from the side

wall.

Installing the shelf support rails

Install the shelf support rails in opposite se-

quence.

The rounded ends of the shelf support

rails must point to the front.

Oven door and glass panels

To clean the oven door remove it.

Caution! Be careful when you remove the

door from the appliance. The door is

heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two door

hinges fully.

3. Close the oven door until the first position

(angle approx. 45°).

Pull the rear shelf

support rail away

from the side wall and

remove it.