Zanussi ZOHXX2X1 Manual do utilizador - Página 23

Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOHXX2X1. Zanussi ZOHXX2X1 29 páginas.

3. Close the oven door halfway to the first

opening position. Then lift and pull forward and

remove the door from its seat.

4. Put the door on a soft cloth on a stable surface.

5. Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal.

Step 1

Before you replace the lamp:

Step 2

6. Pull the door trim to the front to remove it.

7. Hold the door glass panel by its top edge and

carefully pull it out. Make sure the glass slides

out of the supports completely.

8. Clean the glass panels with water and soap.

Dry the glass panels carefully. Do not clean the

glass panels in the dishwasher.

When the cleaning is completed, install the glass

panel and the oven door.

The screen-printing zone must face the inner side

of the door. Make sure that after the installation the

surface of the glass panel frame on the screen-

printing zones is not rough when you touch it.

When installed correctly the door trim clicks.

Make sure that you install the internal glass panel in

the seats correctly.

HOW TO REPLACE: LAMP

WARNING! Risk of electric shock.

The lamp can be hot.

Always hold the halogen lamp with a cloth to

prevent grease residue from burning on the lamp.

Step 3