Zanussi ZOP37962XE Manual do utilizador - Página 22

Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOP37962XE. Zanussi ZOP37962XE 28 páginas.

Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to

release the clip seal. Pull the door trim to the

front to remove it.

Hold the door glass panels by their top edge

and carefully pull them out one by one. Start

from the top panel. Make sure the glass slides

out of the supports completely.

Clean the glass panels with water and soap.

Dry the glass panels carefully.

When the cleaning is completed, install the

glass panels and the oven door. Do the above

steps in the opposite sequence.

Make sure that you put the glass panels (A and

B) back in the correct sequence. The middle

panel (B) has a decorative frame. The screen-

printing zone must face the inner side of the

door. Make sure that after the installation the

surface of the glass panel frame (B) on the

screen-printing zones is not rough when you

touch it.

Make sure that you install the middle panel of

glass in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

CAUTION!

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp