Zanussi ZOP38903XD Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Forno Zanussi ZOP38903XD. Zanussi ZOP38903XD 24 páginas. Product manaul
Também para Zanussi ZOP38903XD: Manual do utilizador (28 páginas)

Imprimir página

• Before maintenance cut the power supply.

• Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which

may result in shattering of the glass.

• Excess spillage must be removed before the pyrolytic cleaning.

Remove all parts from the oven.

• To remove the shelf supports first pull the front of the shelf sup-

port and then the rear end away from the side walls. Install the

shelf supports in the opposite sequence.

Safety instructions

Installation

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed be-

low and adjacent safe structures.

• The sides of the appliance must stay adja-

cent to appliances or to units with the same

height.

Electrical connection

Warning! Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-

ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

www.zanussi.com

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the

Service or an electrician to change a dam-

aged mains cable.

• Do not let mains cables to come in touch

with the appliance door, specially when the

door is hot.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line pro-

tecting cut-outs, fuses (screw type fuses re-

moved from the holder), earth leakage trips

and contactors.

• The electrical installation must have an isola-

tion device which lets you disconnect the ap-

pliance from the mains at all poles. The isola-

tion device must have a contact opening

width of minimum 3 mm.