Zanussi ZOU 346 Folheto de instruções - Página 12

Procurar online ou descarregar pdf Folheto de instruções para Forno Zanussi ZOU 346. Zanussi ZOU 346 18 páginas. Built-in electric oven

Oven door cleaning

For a better cleansing of the oven door, you are

suggested to remove it from the appliance with

the following procedure:

1. Open the oven door completely;

2. Find the hinges linking the door to the

oven (Fig. 6);

3. Unlock and turn the small levers located

on the two hinges (Fig. 7);

4. Handle the door by its left- and right-hand

sides, then slowly turn it towards the oven

until it is half-closed (Fig.8);

5. Gently pull the oven door off its site

(Fig.8);

6. Place it on a steady plan.

Clean the oven door glass with warm water

and a softh cloth only. After cleaning,

assemble the door again by carrying out the

procedure described above backwards. When

the two small levers are placed again on the

hinges, the door will have been accurately fit.

Replacing the oven light

If the oven bulb needs replacing, it must

comply with the following specifications:

Power, 15 or 25 W; Voltage, 230 V (50 Hz);

Temperature Rating of 300 °C; Thread type:

E14.

These bulbs are available from your local

Service Force Centre.

To replace the faulty bulb (Fig. 9):

1. Ensure the oven is disconnected from

the electrical supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace with

the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

Fig. 8

Fig. 9

Fig. 6

Fig. 7