Zanussi FE 1004 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa Zanussi FE 1004. Zanussi FE 1004 23 páginas. Washing machine fe 1004; fje 1204

Imprimir página

Use

Control panel

1 ON/OFF button

Press this button to switch the washing machine on.

Press the ON/OFF button again to switch the

machine off.

2 MAINS-ON light

This light is connected to the ON/OFF button. It

lights up when you press the button, and goes out

when you press it again.

3 FABRIC button

Press this button repeatedly to select the programme

on the basis of the type of laundry to be washed. The

light relevant to the selected programme will light up.

The washing machine will propose a temperature and

automatically select the maximum spin value

provided for the programme you have chosen. You

can change these values by operating buttons 4 and

4 TEMPERATURE button

Press this button repeatedly to increase or decrease

the temperature, if you want your laundry to be washed

at a temperature different from the one proposed by

the washing machine. The relevant light will light up.

Maximum temperatures are 95°C for cotton, 60°C for

synthetic fabrics, 40°C for delicate fabrics and wool.

By selecting position COLD the machine will wash with

cold water. To be used for extremely delicate items,

such as curtains.

Important!

By depressing TEMPERATURE and SPIN SPEED

buttons simultaneously, the acoustic signal at the

end of the cycle is suppressed.

5 SPIN SPEED button

Press this button repeatedly to change the spin

speed, if you want your laundry to be spun at a

speed different from the one proposed by the

washing machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1,000 rpm (FE 1004),

for cotton:

1,200 rpm (FJE 1204);

• for synthetic fabrics and wool 900 rpm;

• for delicate fabrics: 700 rpm.

RINSE HOLD position: when you choose this

option, the machine will not drain the water of the

last rinse, so as not to wrinkle the laundry.

At the end of the cycle, the light of the

START/PAUSE button will flash, to indicate that the

water must be drained.

To complete the cycle, choose one of the following

options:

• Draining and spin:

- Press the START/PAUSE button. The machine

will drain the water, then spin the laundry at the

maximum speed provided for the selected

programme.

- Select spin speed by means of button 5, and

press the START/PAUSE button.

• Drain only

- Press the RESET button once, so as to cause

the DRAIN light

START/PAUSE button.

to light up, then press the