Zanussi FE1005 Folheto de instruções - Página 16

Procurar online ou descarregar pdf Folheto de instruções para Máquina de lavar roupa Zanussi FE1005. Zanussi FE1005 23 páginas. Washing machine fe 1005

Imprimir página

1. Control Panel

132988070gb.qxd

01/06/2004

7. Select the spin speed

HOLD option

Press the SPIN SPEED button

order to select the desired spin speed or the RINSE

HOLD option

. The relevant light will light up.

If you select the RINSE HOLD option, the machine

will stop at the end of the programme with the water

still in the tub.

8. Select the desired options

Depress the relevant buttons to select the required

options.

9. Select the DELAY TIME

Before you start the programme, if you wish the

starting to be delayed, press the DELAY button (11)

repeatedly, or keep it pressed, to select the desired

delay. The selected delay time value (up to 23 hours)

will appear on the display for 3 seconds, then the

duration of the programme will appear again.

10. Start the programme

17.41

Pagina

or the RINSE

repeatedly, in

10. Start the programme

Press the START/PAUSE button

light will stop flashing and only the light relevant to

the phase that is in progress will remain lit.

If you have chosen a delayed start, the washing

machine will begin the countdown.

The display will show the duration of the programme

or the selected delay.

11.

How to change a programme

during its cycle

Before you make any change, you must pause the

washing machine by pressing the START/PAUSE

button.

It is possible to change any phase before the

programme carries it out.

Changing the type of fabric or temperature is

possible, obviously, only during the washing phase.

If it is necessary to drain the water in order to change

the programme in progress, proceed as follows:

• PAUSE the machine by pressing the

START/PAUSE button;

• press the SKIP/RESET button repeatedly, until

only the DRAIN light

remains lit;

• press the START/PAUSE button again.

When the water has been drained, the display shows

a blinking zero. You may now select a new

programme and press the START/PAUSE button to

start it.

12. How to cancel a programme

during its cycle

To cancel a programme that is being carried out, first

pause the washing machine by pressing the

START/PAUSE button, then press the SKIP/RESET

button repeatedly, until the display shows three

blinking dashes.

. The relevant