Zanussi FJ 1354 S Folheto de instruções - Página 6

Procurar online ou descarregar pdf Folheto de instruções para Máquina de lavar roupa Zanussi FJ 1354 S. Zanussi FJ 1354 S 26 páginas. Zanussi instruction washing machine fj 1054 w fj 1254 w fj 1354 s fj 1454 w

Imprimir página

The Control Panel

1 ON/OFF button

Press this button to switch the washing machine on.

Press the ON/OFF button again to switch the machine

off.

2 MAINS-ON light

This light is connected to the ON/OFF button. It lights

up when you press the button, and goes out when you

press it again.

3 FABRICS button

Press this button repeatedly to select the programme on

the basis of the type of laundry to be washed. The light

relevant to the selected programme will light up. The

washing machine will propose a temperature and

automatically select the maximum spin value provided

for the programme you have chosen. You can change

these values by operating buttons 4 and 5.

4 TEMPERATURE button

Press this button repeatedly to increase or decrease the

temperature, if you want your laundry to be washed at a

temperature different from the one proposed by the

washing machine.The relevant light will light up.

Maximum temperatures are 90°C for cotton, 60°C for

synthetic fabrics, 40°C for delicate fabrics and wool.

IMPORTANT!

By pressing the TEMPERATURE and SPIN

SPEED buttons simultaneously, the acoustic signal

is deactivated at the end of the cycle, when selecting

the programmes and in case of an incorrect option

selection .

By pressing these 2 buttons again the acoustic signal

is reactivated.

5 SPIN SPEED button

Press this button repeatedly to change the spin speed, if

you want your laundry to be spun at a speed different

from the one proposed by the washing machine. The

relevant light will light up.

Maximum speeds are:

• for cotton: 1400, 1300, 1200 or 1000 rpm depending

on the model;

• for synthetic fabrics and wool: 900 rpm;

• for delicate fabrics: 700 rpm.

RINSE HOLD position : when you choose this

option, the machine will not drain the water of the last

rinse, so as not to wrinkle the laundry.

At the end of the cycle, the START/PAUSE button light

will flash, to indicate that the water must be drained.

To complete the cycle, choose one of the following

options:

• Draining and spin:

- Press the START/PAUSE button. The machine

will drain the water, then spin the laundry at the

maximum speed provided for the selected

programme.

- Select spin speed by means of button 5, and press

the START/PAUSE button.

• Drain only

- Press the SKIP/RESET button once, so as to cause

the DRAIN light

START/PAUSE button.

Important! If you accidentally press the SKIP/RESET

button more than once the programme is cancelled.,

To drain the water, select any washing programme

by means of the FABRIC button, then press

SKIP/RESET three times in order to select the

DRAIN position (only the DRAIN light will remain

lit).

to light up, then press the