Alead LiveMIC2 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Microfone Alead LiveMIC2. Alead LiveMIC2 11 páginas. Wireless bluetooth microphone & transmitter. for the speech recognition user

Imprimir página

1. Set the sliding switch on the bottom edge of the LiveMIC2 to the "B" position

2. Open the Bluetooth software on your mobile device or computer using the method appropriate

for your device and initiate the

pairing mode. Keep in mind that

the exact method used to add a

Bluetooth device is dependent

upon your devices operating

system and its installed software.

If there is a small Bluetooth icon

on your computer taskbar (very

bottom of screen) you can right-

click on this and select "Add a

Bluetooth device". Alternatively,

you can go to Control Panel >

Devices and Printers and then

click on "Add a device".

3. If currently on, turn off the LiveMIC2 by holding

the power switch for about 3 seconds

4. Put the LiveMIC2 into the pairing mode by

pressing and holding the power button until the

LED begins alternately flashing blue and amber.

5. From your mobile device or PC, look for

identification of "LiveMIC2" and select this. If a

PIN code is requested, enter "0000".

6. For mobile devices, nothing more should be

necessary; for a personal computer, you should

go to the Sound control panel and select the

LiveMIC2 as your default audio device (see

adjacent image).

Basic Use of the LiveMIC2

General Set-up:

Basic use of the LiveMIC2 is straightforward. What follows relates solely to use with a computer or

mobile device. In general terms, follow these steps:

1. Pair your LiveMIC2 with your chosen device using the methods shown above.

2. Decide whether you will be using the on-board mic(s) on the device or using an external mic and

if the latter, connect the external microphone.

3. As needed, adjust the microphone gain as needed to optimize performance