Zanussi ZWQ 5103 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa Zanussi ZWQ 5103. Zanussi ZWQ 5103 16 páginas.
Também para Zanussi ZWQ 5103: Manual do utilizador (13 páginas)

Imprimir página

Dispenser box

How to run a wash cycle?

Using for the first time

• Ensure the electrical and water connections com-

ply with the installation instructions.

• Remove the polystyrene insert and all other items

inside the drum.

Daily use

Loading washing

• Open the lid of the ap-

pliance.

• Open the drum by de-

pressing the locking

button A: The two

shutters unlock auto-

matically.

• Load the washing,

close the drum and the

lid of your washing machine.

Warning! Before closing the lid of your appliance,

ensure that the drum is properly closed :

• When the two shutters are closed,

• locking button A released.

Proportioning of detergents

Pour the amount of washing into the washing

wash

compartments if you have selected the "pre-

wash" option. Pour fabric softener into the compartment

if necessary.

Selection of desired programme

Turn the programme selector to the required programme.

The "Start/Pause"

pushbutton flashes green.

and pre-

Prewash

Wash

Softener (do not fill above the MAX symbol

• Run an initial wash cycle at 90°C, without any

washing but with detergent to clean the water

tank.

If you turn the programme selector to another programme

while a cycle is in progress, the appliance will ignore the

new selected programme. The "Start/Pause"

ton flashes red for a few seconds.

Selecting the spin speed

Press the "Spin"

button to change the spin speed, if

you want your washing to be spun at a different speed to

the one selected by the appliance. You can also select the

"Rinse hold"

option.

For the maximum spin speeds see "Washing pro-

grammes".

Rinse hold

By selecting this function the water of the last rinse is not

emptied out to prevent the fabrics from creasing.

At the end of the programme, if you have selected the

"Rinse hold"

, you then need to select a "Spin"

"Drain"

programme to finish the cycle and empty the

water.

Selecting options

You must select the different options after selecting the

programme and before pressing the "Start/Pause"

pushbutton (see "Programmes table"). Press the desired

button(s) : the corresponding lights come on. If pressed

again, the lights go out. If one of the options is not com-

)

pushbut-