Zanussi ZWS 688 Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa Zanussi ZWS 688. Zanussi ZWS 688 24 páginas.

Imprimir página

ber of flashes is different from the ones indica-

ted below, this is related to a fault that you can

not solve. In this case, contact your local Serv-

ice Centre.

Press simultaneously the buttons 4 and 5 for a

few seconds. The red button 5 light will flash for

a short time as described (the green flash is not

to be considered) :

• 4 flashes = «The washing machine does

not start», follow the corresponding sugges-

tions in «Possible cause/Solutions» box and

restart the programme.

• 1 flash = «The machine does not fill», fol-

low the corresponding suggestions in «Possi-

Problem

The washing machine does

not start:

The machine does not fill:

• 2 flashes = «The machine does not emp-

Once the problem has been eliminated, press

the button 5 to restart the programme. If after all

checks, the problem persists, contact your local

Service Centre.

The door has not been closed (the button 5 red light blinks).

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The programme selector dial is not correctly positioned and/or the button

5 has not been pressed.

• Please turn the selector dial and/or press the button 5 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

The water tap is closed (the button 5 red light blinks).

• Open the water tap.

The inlet hose is squashed or kinked (the button 5 red light blinks).

• Check the inlet hose connection.

The filter in the inlet hose or the inlet valve filter are blocked (the button 5

red light blinks).

• Clean the water inlet filters (see 'Cleaning the water inlet filters' for

more details).

The door is not properly closed (the button 5 red light blinks).

• Close the door firmly.

ble cause/Solutions» box and restart the pro-

gramme.

ty and/or does not spin», follow the corre-

sponding suggestions in «Possible cause/

Solutions» box and restart the programme.

Possible cause/Solution