Zanussi DW 920 Folheto de instruções - Página 12

Procurar online ou descarregar pdf Folheto de instruções para Máquina de lavar loiça Zanussi DW 920. Zanussi DW 920 32 páginas. Dishwasher
Também para Zanussi DW 920: Folheto de instruções (32 páginas), Folheto de instruções (32 páginas)

Imprimir página

Filling with Salt

Only use salt designed specifically for use in

dishwashers. Other types of salt contain high percen¬

tages of other substances which may reduce the effi¬

ciency of the softener.

— Unscrew the cap of the salt container.

— Fill the container with water.

— Place approximately 1.5 kg of dishwasher salt

inside using the funnel provided (see figure).

— Replace the cap making sure that there is no trace

of salt on the screw thread or on the gasket.

— Screw the cap on tightly.

When this has been done, all you have to do is to

periodically add salt to the container. You are

reminded of this by the Salt Refill Light (10) on the

control panel which illuminates when the salt has

finished.

Caution

Only fill with salt just before starting one of the

complete washing programmes (not the Rinse and

Hold programme). This will prevent any grains of salt

or salty water, which may have been spilled,

remaining on the bottom of the machine for any

period of time. This could cause corrosion.

Rinse Aid

This liquid gives the dishes a shiny finish and

improves drying. It is automatically added during the

hot rinse. The dispenser, which is positioned inside

the door, holds about 110 ml of rinse aid, which is

sufficient

for

16-40

dishwashing

programmes,

depending upon the dosage setting.

Filling with Rinse Aid

— Open the container by turning the lid (A) anticlock¬

wise.

— Add

rinse aid until the indicator (B) goes

completely dark when the container is full.

— Add rinse aid again when the indicator (B)

becomes clear.

Remember to CLOSE the lid after every refill.

Caution

Clean up any rinse aid spilt during filling with an

absorbent cloth to avoid excess foaming during the

next wash.

Adjusting the Dose

According to the finish and drying results obtained,

adjust the dose of rinse aid by means of the 6 posi¬

tion selector (C) (position 1 - minimum dose, position

6 - maximum dose). Gradually increase the dose if

there are drops of water or lime spots on the dishes

after washing. Reduce it if there are sticky whitish

streaks on the dishes.