Zanussi DW6837 Folheto de instruções - Página 22

Procurar online ou descarregar pdf Folheto de instruções para Máquina de lavar loiça Zanussi DW6837. Zanussi DW6837 26 páginas. Dishwasher dw6837

Water supply connections

This dishwasher may be fed with either hot (max.

60°) or cold water.

Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very

soiled crockery as it shortens the washing

programmes a lot.

The water pressure must be within the limits given

in the technical specifications.

Your local Water Authority will advise you on the

average mains pressure in your area.

The dishwasher features fill and drain hoses which

can be turned either to the left or the right to suit

the installation.

The locknut must be correctly fitted to avoid water

leaks.

Avoid bends or kinks in the hose which could

prevent or slow down the water supply.

If the machine is connected to new pipes or pipes

which have not been used for a long time, you

should run the water for a few minutes before

connecting the inlet hose. This will prevent deposits

of sand or rust clogging the inlet hose filter.

For making the connection itself, the coupling nut

fitted to the machine's supply hose is designed to

screw onto either a 3/4 inch gas thread spout, or to

a purpose made quick-coupling tap such as the

Press-block.

The water supply hose is fitted with a safety

device, which prevents water from entering the

machine should the inner hose split, due to wear.

The problem is signalled by a red or yellow

indicator which appears in the window (B -

If this happens, close the water tap and have the

hose replaced.

The retaining ring (A -

properly fitted so as to avoid water leaks.

Note:

Only for water supply hoses with Lock-fast

safety device to prevent inadvertent loosening.

To detach the hose press yellow lever (C -

and turn the retaining ring anticlockwise

) must be

)

CA13

PWA03GB