Zanussi ZDT26030FA Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça Zanussi ZDT26030FA. Zanussi ZDT26030FA 21 páginas.

Imprimir página

•

Make sure that there are no residues of food or soil in or around the edge of the sump.

•

Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides.

•

Reassemble the filters (A) and (B).

•

Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.

An incorrect position of the filters can cause bad washing results and damage to the

appliance

CLEANING THE SPRAY ARMS

Do not remove the spray arms. If the holes in the

spray arms are clogged, remove remaining parts of

soil with a thin pointed object.

EXTERNAL CLEANING

•

Clean the appliance with a moist soft cloth.

•

Only use neutral detergents.

•

Do not use abrasive products, abrasive cleaning

pads or solvents.

INTERNAL CLEANING

•

Carefully clean the appliance, including the

rubber gasket of the door, with a soft damp

cloth.

TROUBLESHOOTING

If the appliance does not start or it stops during

operation, first check if you can solve the problem

by yourself with the help of the information in the

table or contact an Authorised Service Centre.

WARNING! Repairs not properly done

may result in serious risk to the safety

of the user. Any repairs must be

performed by qualified personnel.

Problem and alarm code

You cannot activate the appli-

ance.

•

If you regularly use short duration programmes,

these can leave deposits of grease and

limescale inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per month.

•

To maintain the performance of your appliance

at its best, we recommend to use monthly a

specific cleaning product for dishwashers.

Follow carefully the instructions on the

packaging of the product.

With some problems, the display shows an

alarm code.

The majority of problems that can occur can

be solved without the need to contact an

Authorised Service Centre.

Possible cause and solution

•

Make sure that the mains plug is connected to the mains sock-

et.

•

Make sure that there is no damaged fuse in the fuse box.