Zanussi ZDTS 300 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça Zanussi ZDTS 300. Zanussi ZDTS 300 28 páginas.

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C until the lights of the func-

tion buttons A, B and C start flashing.

3. Press function button A, the lights function

buttons B and C turn off while the light of

function button A goes flashing, at the

same time the end of programme indica-

tor light starts to flash, along with a se-

quence of intermittent audible signals. The

current level is indicated by the number of

flashes of the end of programme indicator

light with a sequence of intermittent audible

signals and a pause of a few seconds.

Examples:

5 flashes / 5 intermittent audible signals,

pause,

Use of dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

5 flashes / 5 intermittent audible signals,

pause, etc...= level 5

6 flashes / 6 intermittent audible signals,

pause,

6 flashes / 6 intermittent audible signals,

pause, etc...= level 6

4. To change the level press the function but-

ton A. Each time button is pressed the level

changes (For the selection of a new level

see the chart).

Examples:

If the current level is 5, by pressing function

button A once, level 6 is selected. If the

current level is 10, by pressing button A

once, level 1 is selected.

5. To memorise the operation, switch off the

dishwasher by pressing the On/Off button.