Zanussi ZTI 6100 Livro de instruções - Página 23

Procurar online ou descarregar pdf Livro de instruções para Máquina de lavar loiça Zanussi ZTI 6100. Zanussi ZTI 6100 27 páginas.

Water outlet hose connection

The end of the drain hose can be connected in the

following ways:

1. To the sink outlet siphon, securing it if necessary

with a clip.

2. To a stand pipe provided with vent-hole, minimum

internal diameter 4 cm.

The waste connection must be at a height of between

30 cm (minimum) and 100 cm (maximum) from the

bottom of the dishwasher.

The drain hose can face either to the right or left of the

dishwasher

Ensure the hose is not bent or squashed as this could

prevent or slow down the discharge of water.

If you use a drain hose extension it must be no longer

than 2 metres and its internal diameter must be no

smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used

for connections to the waste outlet must be no smaller

than the diameter of the hose provided.

The sink plug must not be in place when the

machine is draining as this could cause the water

to siphon back into the machine.

Before plugging the appliance into the wall socket,

make sure that:

1. The mains voltage corresponds to the voltage given

in the "Technical specifications".

2. The meter, fuses, mains power supply and wall

socket can all take the maximum load required.

Make sure that the socket and plug are compatible

without having to use any type of adaptor. If

necessary, have the domestic wiring system socket

replaced.

Safety standards require the appliance to be

earthed.

The manufacture accepts no liability for

failure to observe the above safety

precautions.

This appliance complies with the following E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

CS13

CS14

+ 2 m max

COL06en