Zanussi ZBE 602 Folheto de instruções - Página 12

Procurar online ou descarregar pdf Folheto de instruções para Hob Zanussi ZBE 602. Zanussi ZBE 602 13 páginas. Zanussi instruction electric hob zbe 602

Imprimir página

1. Description of the Hob

Building over a kitchen unit with door

Proper arrangements must be taken in designing the

furniture unit, in order to avoid any contact with the

bottom of the hob which can be hot when in

operation. The recommended solution is shown in

diagram 3.

The panel fitted under the hob ("a") should be easily

removable to allow easy access if technical assistance

is needed. The space behind the kitchen unit ("b") can

be used for connections.

Fitting the hob to the worktop

Before fitting the hob into the cut out, a sealing

gasket supplied with the hob must be fitted to the

edge of the cut out. It is essential that no gaps are left

in this seal in order to prevent spillage near the hob

seeping into the cabinet below.

1) Place the sealing gasket all around the edge

of the cut out.

2) Place the hob into the cut out and secure it by

means of the relevant fixing clamps and

screws, as shown in the diagram.

3) Remove the excess seal

The edge of the hob forms a double seal which

prevents the ingress of liquids.

FO 1013

Dimensions are given in mm.

FO 0199

Seal