Zanussi ZGF 759 Folheto de instruções - Página 12

Procurar online ou descarregar pdf Folheto de instruções para Hob Zanussi ZGF 759. Zanussi ZGF 759 14 páginas. Gas hob

Electrical connections

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person,

in accordance with the current regulations.

THIS APPLIANCE MUST BE

EARTHED.

The manufacturer declines any liability

should these safety measures not be

observed.

This appliance is designed to be connected

to a 230 V 50Hz AC electrical supply.

Before the appliance is connected:

1) check that the main fuse and the domestic installation

can support the load (see the rating label);

2) check that the power supply is properly earthed in

compliance with the current rules;

3) check the socket or the double pole switch used for

the electrical connection can be easily reached with

the appliance built in the forniture unit. Before

switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance

rating plate. The rating plate is located on the bottom

of the hob. A copy is attached on the back cover of

this book.

The appliance is supplied with a 3 core flexible

supply cord incorporating a plug. Connect the plug to

an adequate socket.

In the case of a permanent connection, it is necessary

that you install a double pole switch between the

appliance and the electricity supply (mains), with a

minimum gap of 3 mm. between the switch contacts

and of a type suitable for the required load in

compliance with the current electric regulations.

The switch must not break the yellow and green earth

cable at any point.

Ensure that the hob supply cord does not

come into contact with surfaces with

temperatures higher than 50 deg. C.